UK-7
F22
p
on the unit (or remote control)
on the unit (or remote control)
SKIP/TUNE SEARCH
on the unit (or remote control)
AUX IN PLAY
The AUX input is located
of the unit. Use a 3.5mm stereo jack cable to connect audio equipment
through the LINE IN jack.
1.
To select the AUX input function,
repeatedly press the FUNCTION button on the unit (or remote control) until the
AUX is indicated on the display.
2. Press the VOLUME (+ or -) button to adjust the sound output level.
Note: LINE in cable not included.
MUTE SETTING(on the remote control)
1. When you press the MUTE button once on the remote control, the volume level will flash and the audio output will be
temporarily terminated.(F22)
2. Press the MUTE button again, the volume level and the audio output will return to normal.
Plug your headphones (3.5mm mini-stereo plug) into the headphones jack on the left
of the unit. The sound
will be heard through the headphones, not the speaker.
SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.
Ventilation warning : " The normal ventilation of the product shall not be impeded for intended use."
During the unit in iPhone/iPod MENU mode:
Note:
iPod touch&iPhone series needs to manual into the music menu first, then proceeding the next operation.
1. During the unit in iPod mode, ress the STOP/MENU button
once, the unit
will enter to the iPhone/iPod MENU mode. To select the current menu as belows :
Music > Extras > Photo Import (without this function display on the iPod Mini) > Settings > Shuffle Songs >
Backlight > Now Playing will shows on the iPod Player display.
2. Press the PRESET/FOLDER/ARROW (UP or DOWN) button on the remote control to search the current menu.
3. Press the SELECT/MONO/ST. button
enter to the desired menu folder.
4. Press the
(UP or DOWN) button on the unit (or remote control) to search the current
content in the each desired menu folder.
5. If you want return to the iPod menu, press the STOP/MENU button
again.
Charging the iPhone/iPod Player battery through the main unit:
1. iPhone/iPod Player has a internal nonremovable battery, the battery may need to be charged that is not used for a
while.
2. You can charge the iPhone/iPod Player through the main unit automatically under the STANDBY or POWER ON mode.
Note : 1. The iPhone/iPod Player battery is 80-percent charged in about an hour, and fully charged in about a few hours.
If you charge it while playing music, it may take longer.
2. It is not better to charge under the TUNER mode. It may interfere the reception.
3. In any time, you can control the iPhone/iPod player on the main unit, remote control or iPhone/iPod player
itself while the unit in the "iPod" or "iPod MENU" mode.
4. In any time, the iPhone/iPod player must be fixed well under in the STANDBY mode to avoid the unit and
iPhone/iPod player were damaged.
on the left hand side
LISTEN TO THE MUSIC BY USING HEADPHONE
penal
SPECIFICATION
POWER SUPPLY : AC 230-240V~50Hz
OUTPUT POWER : 5 Watts x 2
UNIT DIMENSION : 500 (W) x 104 (D) x 214.5 (H) mm
N. W. : 2.4 kg
RADIO SECTION
FREQUENCY RANGE : FM 87.5 - 108 MHz
COMPACT DISC SECTION
OPTICAL PICKUP : 3 - BEAM LASER
FREQUENCY RESPONSE : 100Hz - 16kHz
