UK-5
F7
F8
Note: If the main unit is not working properly, disconnect the power source and then reconnect it again
ID3 OPERATION
During in the MP3/WMA mode
1. Press the ID3/MEM/C-ADJ. button once to open the ID3 function.
2. If the MP3/WMA file is written “ID3”, it will
automatically search the information of “TITLE NAME”, “ARTIST NAME”
and “ALBUM NAME” indicated on the display .
3. Press the ID3/MEM/C-ADJ. button again. Then the unit will resume to play normally.
USB/SD CARD OPERATION
During in the STANDBY mode
1. Insert the USB DEVICE or SD/MMC CARD, and then press the STANDBY button on the main unit (or remote
control) to power"ON" the unit.
2. Press the FUNCTION button on the main unit (or remote control) to select the USB or SD/MMC mode. The main
unit will automatically read the total number of the folders and tracks at the same time. Then playback starts with
the first track. The display shows the current track number and its elapsed time.(F9)
3. If the USB memory device more than one folder.
a. Press the PRESET/FOLDER/ARROW (UP or DOWN) button to select each folder.
b. Press the SKIP/TUNE SEARCH(UP or DOWN) button to select current track in desired folder.
4. If the MP3 and WMA are written in "ID3".
a. During the unit in the MP3 or WMA playing. Press the ID3/MEM/C-ADJ. button once. The display will show
a "ID3 ON", and then it will automatically search more than 64 letters for "TITLE NAME", "ARTIST NAME" or
"ALBUM NAME" which move from the right corner to the left corner on the display continuously.
b. Press the ID3/MEM/C-ADJ. button once again. The display will show a "ID3 OFF", and then the main unit
will play normally.
1. The main unit can play MP3 and WMA only in this mode.
2. This unit can support most of USB devices and SD/MMC/SDHC cards (up-to 32GB memory capacity for
SDHC). It cannot access (or, need longer time to access) those devices with big memory capacity.
3. It can support USB version 1.1 and 2.0.
4. Not support all kinds of “ dual voltage-MMC” card nor “MMC-Plus” card.
5. The main unit does not support the WMA file which is protected “DRM FILE”.
Note:
Playing The Entire flash disc
1. To interrupt playback , press the PLAY/PAUSE button. The time elapsed indicator will flash.(F10)
2. To resume playback, press the PLAY/PAUSE button again.
3. To stop playback, press the STOP/MENU button.
F9
F10
Note :
In any time, the USB DEVICE or SD CARD must be fixed well under in the STANDBY mode to avoid the main
unit and USB DEVICE or SD CARD were damaged.
REPEAT PLAY
- CD
1. Press the REPEAT button once , REPEAT is displayed. The main unit will play the current track repeatedly.(F11)
2. Press the REPEAT button twice, REPEAT ALL is displayed. The main unit will play all tracks repeatedly.(F12)
3. Press the REPEAT button thrice, REPEAT function will be off.
- MP3/WMA
1. Press the REPEAT button once , then REPEAT is displayed. It will play the current track repeatedly.(F13)
2. Press the REPEAT button twice, REPEAT ALL is displayed. It will play all tracks repeatedly.(F14)
3. Press the REPEAT button thrice, then REPEAT ALBUM is displayed. It will play repeatedly the current
album. (F15)
4. Press the REPEAT button four times, then REPEAT function will be off.
F11
F12
5. To change the ALBUM NO., press the PRESET/FOLDER/ARROW (UP or DOWN) button once.
6. To stop playback, press the STOP button once on the unit (or remote control).
