Denver MCB-700, Instruction Manual

Page: 6 / 108

BATTERY INSTALLATION
REMOTE CONTROL
1 7
8
9
10
11
12
2
3
4
5
6
1. ON/ OFF
2. STOP
3. SKIP -
4. VOL -/ AL 1
5. ALBUM -
6. MODE/ CLOCK
7. FUNCTION
8. PLAY/ PAUSE
9. SKIP +
10. VOL +/AL 2
11. ALBUM +
12. PROGRAM
Insert a “Cell” size batteries into the battery compartment. Be sure that the batteries are inserted
correctly to avoid damage to the remote control. Always remove the batteries when the remote
control will not be used for a long period of time, as this will cause leakage to the batter ies and
subsequently damage to your set.
Notes:
- Power button on main unit must be ‘On’ in order for Remote Control to operate.
- If the distance required between the remote control and the appliance decreases, the ba tteries
are exhausted. In this case replace the batteries with new one.
SENSOR WINDOW OF THE RECEIVER
- Even if the remote control is operated within the effective range, its operation may be impossible if
there are any obstacies between the appliance and the remote control.
- If the remote control is operated near other appliances which generate infrared rays, or i f other
remote control devices using infrared rays are used near the appliance, it may operate incorrectly.
INSTALLING BATTERIES
Slide out cover and install single “Cell” battery
with polarities as shown
+
E-4