ENG 3
2.4. Learn how to use it
Step 1: Press the power button to turn on the hoverboard.
Step 2: Put the hoverboard on a flat ground and make sure all safety measures are taken. Put one foot on the
pad that will trigger the pedal switch to turn on the operation indicator, after the system enters the
selfbalancing mode, put the other foot on the pad.
Step 3: Take control of the hoverboard
s’ forwards or backwards, do remember the movement of your body
should not be abrupt.
If you are not in a balanced condition when you trigger the foot-switch, the buzzer will alarm, and the warning
LED will light. The system is not in a self-balanced condition. Without a balanced condition, you should not
operate the hoverboard. Then you need to calibrate the sensors, see point 2.2.
Step 4: Control the left and right direction of the hoverboard.
Step 5: Before you get off, make sure that the hoverboard is still in balanced condition and stopped, then step
off one foot, then the other foot.
Tilt right foot forward- Turn Left
Tilt left foot forward- Turn Right
You should never turn violently when driving fast.
You should never ride sideways or turn on a slope. It will lead to a fall and injury.
2.5.
Always react on alarms
Hoverboard will not operate in the following situations:
-
During operation, if the system runs an error, the hoverboard will prompt operators in different ways such
as prohibit riding, alarm indicator lights, buzzer alarm beeps intermittently the system cannot enter
selfbalancing mode.
-
When stepping on the hoverboard the platform moves forwards or backwards more than 10 degrees, the
unit will not operate.
-
The voltage of the battery is too low.
-
During charging.
NOTE:
