ENG 4
-
During operation, the platform turns upside down will prohibit operation.
-
Over speeding.
-
The battery is not charged enough.
-
Tire stall, two seconds later the scooter enters power off mode.
-
The battery voltage is lower than the protection value, 15 seconds later the hoverboard enters into power
off mode.
-
Continuing large current discharge (such as a long-time climbing a very steep slope)
When the hoverboard enters into the shutdown state (when
the battery is low), the system will lock down the machine
automatically. It can be unlocked when you press the power
button. When the battery has been depleted or the system
gives out information with safety shutdown, please do not
continue to drive the hoverboard, otherwise, the hoverboard
cannot balance for the lack of battery. In this condition, the
driver is likely to be harmed. If the battery reaches the
minimum, the continued driving of the hoverboard will
negatively affect the battery’s life.
- The product should only be used in temperatures between -
10°C - +45°C.
2.6.
Riding practice
Before you drive the hoverboard, please make sure you are familiar with the skills of driving it. Always practice
with someone ready to hold/catch you.
-
Use casual (but not loose) clothes and flat shoes in order to retain your body’s flexibility.
- Please go to open spaces to practice driving the hoverboard until you can easily get on /off.
- Make sure that the surface is level.
-
When you are driving on different terrain, you must slow down.
-
Hoverboard is a driving tool designed for a smooth road. Reduce speed if you drive the hoverboard on a
rough surface.
- Before driving: Read Chapter 4 on maximum speed and Chapter 5 on safe driving thoroughly
Chapter 3 Pedal Sensor and Indicator operation
3.1.
Pedal sensor
The hoverboard has 4 sensors below the pedal, when the operator steps on the pedal, the hoverboard will
adjust itself to a balancing pattern automatically. When riding it, you have to make sure that the pedal is being
fully stepped on, please do not step on the parts outside the pedal. Do not put things on the pedals to make
the hoverboard operate by itself and increase the possibility of crashing and even cause personal injury and
damage to the hoverboard itself.
