TABLE OF CONTENTS
1. User Safety Instructions
2. General Parts
1) TV Unit
2) Remote Control
3. Basic Characteristics and Functions
4. Connections
1) Connection to the power source
2) Use of the Headphone
3) Connection to the External AV Equipment
5. Operation Instructions
6. Reset TV Channel
7. General Specifications
8. General troubleshooting
9. Accessories List
2
3
9
1 0
1 0
11
12
13
8
12
1
8. General Troubleshooting
Check the following points before assuming malfunctions of the TV set:
Phenomenon
Reasons
No picture & sound
No picture
No sound
Poor reception
Dark or blurred picture
Unclear or unstable picture
Picture moves up &
blurs or folds over
down,
No colour
Improper connection of AC adaptor or car adaptor.
The batteries are run down or the poles of the batteries are set adversely.
TV reception channel is not right and try to reset the unit.
Relocate the TV set to the place where reception is better.
Sound volume is too low.
The earphone has been plugged in or the signal is too weak or sound
mute function is operated.
TV rod antenna is not correctly adjusted or TV channel is not right.
The brightness & contrast are too low.
The battery voltage is too low.
TV rod antenna is not properly adjusted or in too weak
area.
signal
reception
TV rod antenna is not rightly adjusted. The signal reception is too weak
or caused by signal reflection from the buildings nearby or mountains.
Colour is not set properly.
Interfered snow picture
The signal is interferred by car s engine, railway, high tension wires,
neon signs or radio frequency.
,