background image

                                                                                                                                                                                                                                                         

 

 

Carefully turn the filter in an anti-clockwise direction, 

until it disengages. Now remove the Filter.

 

 

 

Clean  the  Filter  thoroughly.  Never  clean  the  Filter 

using  soap  or  any  other  cleaning  fluid.  This  would 

destroy the filter! 

 

If the filter is heavily soiled, and this is leading to a 

reduction  in  suction  power,  it  is  recommended  that 

the filter be replaced with a new one. 

 

Once  cleaning  is  completed,  replace  the  filter  by  simply 

reversing  the  process  outlined 

above. 

 

Place  the  filter  back  in  the 

dust receiver tank and turn it 

carefully 

in 

clockwise 

direction,  until  it  locks  in 

place. 

Now place the reassembled dust receiver tank back in the 

DENVER CVC-1800 cyclone vacuum cleaner, ensuring that 

it  clicks  into  place.  Your  DENVER  CVC-1800  cyclone 

cleaner is now ready for use.   

 

 

smoking  objects,  such  as  cigarettes  matches  or  hot 

ashes, or any flammable liquids.

 

 

 

Keep the pipe or tube and any other orifice away from 

the face and body.   

 

 

Do  not  use  the  appliance  without  the  correct  dust 

receiver tank in place. 

 

Always unplug the appliance before fitting or removing 

any accessory parts. 

 

Read  through  the  assembly  instructions  carefully 

before  assembling  the  appliance.  The  assembly 

sequence must be followed precisely. 

 

In  the  interest  of  your  own  safety  please  check  the 

appliance carefully for damage before use. In case any 

faults  do  not  use  the  appliance  until  it  has  been 

repaired by and expert. 

 

Only use the original accessories. 

 

Always remove the plug from the main power supply 

before fitting or removing any accessory parts. 

 

In  order  to  avoid  an  electrical  shock  never  immerse 

the power supply cable, plug or any other parts of the 

appliance in water or any other fluid. 

 

ONLY use the appliance for the purpose intended. 

 

Only  use  the  appliance  once  it  has  been  completely 

assembled and is ready for use! 

 

NEVER immerse appliance parts in water. 

 

NEVER use the appliance close to water. 

 

NEVER  clean  the  appliance  using  a  sourcing  pad  or 

abrasive cloth. 

 

DO NOT use cleaning brushes or abrasive agents. 

 

Do  not  crush  or  bend  the  cable  nor  place  it  on  hot 

Summary of Contents for CVC-1800











Reviews: