EN-4
B
A
Main unit
Rear of the
front panel
Panel case
Front panel
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit
from being stolen.
DETACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the
button to OFF
first. Then press the button (15)
and detach the panel by pulling it
towards you as illustrated.
Note:
Be sure not to drop the panel when detaching it from the unit.
Notes:
• Make sure that the front panel is the right way up when attaching it to the unit as it cannot be attached
upside down.
• Do not press the front panel hard against the unit when attaching it. It can be easily attached by pressing
it lightly against the unit.
• When you carry the front panel with you, put it in the supplied front panel case.
• Do not press hard or give excessive pressure to the display window of the front panel when attaching
it to the unit.
CLEANING THE CONNECTOR
The unit may not function properly if the connectors between the
unit and the front panel are contaminated with dirt. In order to
prevent this from happening, detach the front panel by pressing
the
button and clean the connector from time to time.
Clean the connector with a cotton swab together with contact
cleaner as illustrated. Be sure to clean them carefully pin by pin
and make sure not to damage the connecting points.
B
A
Front panel
Cotton Swab
Rear of
front panel
Main unit
10
7
1
2
3
4
4
4
5
5
6
6
8
9
1. UNIT
. RELEASE CASE
3. DASH BOARD
4. HEX NUT
5. LOCK WASHER
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X 15 HEX BOLT
Dashboard
TO SUPPORT THE UNIT
