background image

PROGRAM FUNCTION

The Program feature can be used to program up to 20 tracks to play in a selected order.

1. While in the stop mode only (CD is not playing), press the PROG Button, LCD Display will show the

wording “PROG” & “P01”.

2. Press the SKIP+ / SKIP- button to allocate the desired track.

3. Press the PROG button to select and store the track into memory.

4. Repeat step 2 to 3 to select up to 20 tracks.

5. To play the selected tracks (in the program mode), press the PLAY/PAUSE button. The “PROG”

appear on LCD Display.

6. Press the SKIP- button to hear the previous or press the SKIP+ button to hear next program track.

Note: 

After all of the programmed tracks have played, the CD player will return to the stop mode.

To clear the programmed tracks from memory, press STOP button until “PROG” disappear

SLEEP FUNCTON IN STANDBY ON MODE

1. Tune in the desired radio station or CD play or AUX mode and adjust the volume control.

2. Press the SLEEP Button. The “90” will appear on the display.

3. Repeatedly press the SLEEP Button for desired sleep time between 90, 80, 70, 60, 50, 40, 30, 20, 10

minutes.

4. The unit will automatically switch off when the SLEEP time expires.

AUX INPUT JACK 

1. Press the STANDBY/FUNCTION button on the unit repeatedly, until the “AUX” shown on the display.

OR, press the STANDBY button on the remote to turn on the unit, then press the FUNCTION button

on the remote until the AUX icon shown on the display.

2. Connect the AUX connect wire from the out jack of your Personal Player such as portable MP3 player

to the AUX input jack.

3. Play Start from your Personal Player.

HEADPHONE JACK

This unit will accept stereo headphones with a Ф 3.5mm plug. Before connecting the headphones set

the volume to minimum level as not to damage your ears or the headphones. Connect the headphones

to the headphones jack. The speakers will be automatically disconnected.

Warning: Prolonged exposure to high sound levels may permanently damage your hearing. You may

not hear some warning sound while wearing these headphones.

ENG-8

Summary of Contents for 5706751023521










Reviews: