Unit power supply (mains 230V/50Hz)
Connect the power cable plug to the (230V) wall outlet.
WARNING
•
Before using the unit, check that the local mains supply is compatible with the HI-FI System (230V
50Hz).
•
Do not plug or unplug the power cable when your hands wet.
•
When planning not to use this unit for long periods of time (i.e, Vacation etc.) disconnect the plug from
the wall outlet.
•
When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord in order
to avoid shock risks caused by the damaged cable.
BATTERY SAFETY PRECAUTIONS
•
Keep batteries away from children and pets.
•
Insert the battery observing the proper polarity (+/-). Failure to properly align the battery polarity can
cause personal injury and/or property damage.
•
Remove spent or discharged batteries from the product. Remove the battery when the product will not
be used for extended periods of time to prevent damage due to rusted or corroded batteries
•
Never throw batteries into a fire, Do not expose batteries to fire or other heat sources.
•
Battery Disposal: Spent or discharged batteries must be properly disposed of and recycled in
compliance with all applicable laws. For detailed information, contact your local country solid waste
authority.
•
Follow the battery manufacturer’s safety, usage, and disposal instructions.
BATTERY BACKUP
Two 1.5V “AA” batteries (not included) may be installed as a backup option to maintain the time if
electrical power fails. In the event of a power outage, the time will not appear on the clock LCD Display,
however the clock will continue to operate and the actual time will be maintained. The Clock LCD
Display and other functions will resume once electrical power is restored if used the backup battery .The
backup battery should be replaced as needed; Remove the battery if the clock is not used or stored for
long periods of time.
TO SET THE CLOCK TIME
1. In STANDBY OFF mode, press and hold the TIME SET Button, then press SKIP+ / SKIP- to desired
24H/12H. And press TIME SET button again.
2. Then press SKIP+ / SKIP- button to set the desired Hour Time.
3. Then press SKIP+ / SKIP- button to set the desired Min Time.
4. After the desired time has set, press TIME SET button to confirm.
TO SET ALARM FUNCTION
In Standby off mode
1. Press and hold the ALARM SET button, the alarm1 icon and HOUR time will blink.
2. Then press SKIP+ / SKIP- button to set the desired Hour Time.
3. Press the ALARM SET button, The MIN time will blink.
4. Then press SKIP+ / SKIP- button to set the desired Min Time.
5. After setting the alarm time as your desired, to press AL.SET button again. You can now select
whether the alarm should go on to Buzzer, Radio or CD. (The alarm 1 icon still blink in display).
Wake to buzzer
This is the default setting (no indication on the display above the time)
Wake to Radio
Press the SKIP+ / SKIP- button until “FM” is shown in the display(above the time). At the set time the
ENG-5
