3.
Press and hold the BACKWARD or FORWARD button to automatically tune to the next
available FM station.
4.
Press the POWER button to switch the radio off.
** Unroll and extend the antenna to improve FM signal reception.
Setting preset radio stations
You can store up to 10 preset stations.
1.
Tune to a station.
2.
Press and hold the MEM/M+ button until “P01” (or the next available preset slot) shows
on the display.
3.
Press the BACKWARD or FORWARD button to select a preset number (P01-P10).
4.
Press the MEM/M+ button to confirm. The preset station has been set up.
5.
Press the MEM/M+ button repeatedly while listening to the radio to select a preset
station. Alternatively, press the MEM/M+ button once and then press the BACKWARD or
FORWARD button to select a preset station.
Using the alarms
Setting alarms
The radio have 2 alarm settings. To set the alarms:
1.
In standby mode, press and hold the ALARM 1 or ALARM 2 button to enter the alarm
time setting mode.
2.
In the alarm setting mode, press the ALARM 1 or ALARM 2 repeatedly to cycle through
the setting options:
Alarm time > Alarm sound source
•
Setting alarm time
: Press the BACKWARD to set the hour time and FORWARD button
to set the minute time.
•
Setting alarm sound source
: Press the BACKWARD or FORWARD button to select the
alarm or radio as the alarm sound source. The corresponding alarm indicator will turn on
according to your selection.
Once the alarm setting is done, the alarm will be automatically activated with the
corresponding alarm indicator (alarm or radio) switched on.
Turning the alarms on or off
When the clock time is displayed, press the ALARM 1 or ALARM 2 button to enable or
disable the respective alarm. The corresponding Alarm 1 or Alarm 2 indicator (alarm or
radio) will switch on when the alarm is enabled.
Deactivating a sounding alarm
•
Press ALARM OFF button to switch off a sounding alarm.
•
When the alarm rings, the corresponding Alarm 1 or Alarm 2 indicator (alarm or radio)
flashes on the display.
Setting Snooze mode
•
To temporarily silence a sounding alarm, press the SNOOZE button. The alarm will
sound again when the snooze period (9 minutes) is over.
•
The corresponding Alarm 1 or Alarm 2 indicator (alarm or radio) flashes on the display
during the snooze period.
