Denver Electronics CAU-439BT, Instruction Manual

Page: 9 / 47

WORKING WITH THE UNIT
1.Bluetooth Connection
The Bluetooth of this radio is always in standby mode for
pairing and connection, signaled by a blinking Bluetooth
icon on the LCD Display.
At this blinking time, please run the Bluetooth search and
connect function in your cellphone. The car radio model no
"Denver BT" will be shown on the cellphone. Select this car
radio and connect. When you are asked for a connection
password, please input "0000" in your cellphone to finish
the pairing. The Bluetooth icon on the display will be on
indicating that the connection is established. Bluetooth
function is ready to use.
2.USB Flashdrive & SD Card
Simply plug your USB Flashdrive or SD Card (or both) into
the USB socket/Card slot. The contents will be played
automatically. These can be removed at any time.
3.Aux-in Jack
The front Aux-in Jack can be used for connecting additional
audio devices (i.e.MP3 players/lpods) to the unit The Aux-in
cable (supplied with the unit) can be used for this
connection. Simply connect one end into the Aux-in Jack
and the other to your MP3/lpod.
4.Radio
Press the MODE button to select RADIO mode.You can
press and hold the seek up/down button to search for your
favorite stations, or you can press and hold the APS button
to automatically scan the strongest stations and save them
as presets.When it is on RDS mode, press PTY button to
select suitable mode.
6