2 Cleaning and Sterilization
Page 8
2 Cleaning & Sterilization
WARNING:
The dental motor MUST be sterilized before use and after each use
Cleaning
DENTSPLY recommends the following steps between each patient use to prevent cross-contamination and to ensure continued
trouble-free operation of your Midwest
®
E motor.
To Clean the Motor:
Clean the surface by creating a 60 to 70% alcohol and water solution at 30°C ± 5°C (86°F ± 41°F) and brush the surface using a brush
such as medium-hard toothbrush. Lubricate the motor coupling as shown below.
Note:
Sterilization of the dental motor is required after cleaning
