Operating instructions
5 Operation
66 27 587 D3673.201.02.04.02
31
English
5.2
Inserting and removing burs
IMPORTANT: Check the push button to make sure it moves freely!
NOTE! Use only burs and diamond polishers that are sharp and
undamaged. Use clean burs and diamond polishers to avoid dirt in
the clamping system.
CAUTION! A loose or partially removed bur can detach itself
from the head or break off. This may cause injury! Therefore, use
the high-speed handpiece only if the bur is inserted at least 10 mm
and is clamped securely in place.
CAUTION! A loose or partially removed bur can become
detached from the head or break off. This leads to a risk of injury.
Operate the high-speed handpiece only with the clamping lever
closed.
CAUTION! Stop using the high-speed handpiece if the clamping
lever does not stay closed by itself. If the chuck system is not
completely closed, the mechanism may be activated and lead to
