Dentmate LEDEX WL-090, Instructions For Use Manual

Page: 7 / 27

2.3. Features
MODE : Pressing this button sequentially toggles the
unit through the six curing modes.
TIME : Pressing this button sequentially toggles the unit
through the serial curing time.
ON-OFF : Pressing this button initiates the selected
curing cycle. Pressing this button during the cure cycle
will interrupt or end the cycle. If the unit is in the sleep
mode, pressing this button will awaken the unit of the
curing mode which is last used.
a
b
c
a
b
c
a
c
b
d
The display allows different information required by the
user.
As shown above, it comprises different zones identified
from top to bottom as follows:
A display of the curing mode selected.
The output mode icons represent the type of light
emission.
There’s a display in seconds of the duration of the
selected curing cycle. During operation, this countdown
display indicates the remaining activation time until the
current cycle is completed.
A battery charge level indicator is symbolized by a
ladder with 0 to 5 levels and charging status.
a
b
c
d
2.4. Display
4
EN