4
CAUTION
May cause serious eye and skin irritation or damage. When combined with water, may cause moderate to severe alkali
burns. Contains silica; do not breathe dust.
Protective Measures:
The use of safety glasses and chemical-resistant gloves is recommended. Use appropriate
clothing to minimize skin contact. The use of a NIOSH-approved respirator is required to protect respiratory tract when
ventilation is not adequate to limit exposure below the permissible exposure limit (PEL). Refer to Safety Data Sheet,
please contact Winn & Coales (Denso) Ltd for an SDS.
FIRST AID
Eye Contact:
Immediately fl ush eyes with plenty of cool water for at least 15 minutes while holding the eyes open.
If redness, burning, blurred vision, or swelling persists, seek medical advice.
Skin Contact:
Remove product and wash affected area with soap and water. Do not apply greases or ointments.
Remove contaminated clothing. Wash clothing with soap and water before reuse. If redness, burning, or swelling
persists, seek medical advice.
Ingestion:
DO NOT INDUCE VOMITING. Seek medical advice. Never administer anything by mouth to an unconscious
person. Rinse mouth out with water. Never leave affected person unattended. If vomiting occurs spontaneously, lay
affected person on their side, keeping head below hips to prevent aspiration of material into lungs.
Inhalation:
Remove affected person to fresh air. If affected person continues to experience diffi culty breathing, seek
medical advice.
CLEAN-UP
Spills:
Sweep or vacuum material and place in a suitable container. Keep out of sewers, storm drains, surface waters,
and soils.
Surface Clean:
Remove any residue with hot soapy water. Cured material can be removed only by mechanical means.
Tools and Equipment:
Clean with soap and water immediately after use.
Skin:
Use a non-toxic, pumice-based soap, citrus-based hand cleaner, or waterless hand-cleaner towel. Never use
solvents to remove product from skin.
Disposal:
Dispose of container and unused contents in accordance with federal, state, and local requirements.
Containers may be recycled; consult local regulations for exceptions.
SAFETY
SeaShield
™
FX-225
Non-Shrink Underwater Grout
IMPORTANT INFORMATION
Winn & Coales (Denso) Ltd pursue a policy to develop and continually improve all of our products and therefore information given in this data sheet is intended as a general guide and does not constitute a
warranty, specifi cation or risk assessment. These guidelines may not cover all circumstances; however, our sales personnel are committed to assisting the user in establishing the suitability of the product
for its intended purpose and additional specifi c information, including Safety Data Sheets, is available on request. We recommend that installation is carried out with due regard to Health and Safety and
in accordance with relevant local statutes and regulations. Any confl ict between these guidelines and the specifi c project specifi cations must be resolved by the user before work commences. All rights
reserved.
www.denso.net
|
+44 (0) 208 670 7511
VER 27.01.22
