- 9 -
CAUTION
Operating environments and
Installation
Never put the product in places where there are excessively high temperatures, such as
inside closed-up automobiles, in places exposed to direct sunlight, or in places generating
heat accumulation caused by radiant, etc. Doing so could affect the parts, resulting in a fire.
Avoid using the product in extremely humid, dusty areas or, where there are drastic
temperature changes. Moisture or dust will get into the product, resulting in malfunction, fire,
or electrical shock.
This product uses the 13.56MHz frequency band to communicate with Tags. Some devices,
such as some motors, inverters, generate electromagnetic waves (i.e., noise) that can affect
communications with Tags. If any of these devices are nearby, communications with Tags
may be affected, resulting in malfunction. If the product is to be used near such devices,
check the effects on communications before using the product.
Avoid wiring nearby power line of high voltage or high current. Doing so could affect
communications, resulting in malfunction.
Ground the earth terminal of this product and any metallic material located around the
product to 100
Ω
or less.
Do not use the product nearby a radio set such as personal radio or amateur radio. Doing so
could cause malfunction.
Communications performance may be reduced, resulting in malfunction due to mutual
interference if there is more than one Read/Write Antenna. Refer to the manual and confirm
that there is no mutual interference between Read/Write Antennas.
Handling
Never disassemble or modify the product, doing so could result in fire or electric shock.
Do not apply static electricity to electrical parts or connector when installing or wiring the
device. Doing so could cause fire or electrical shock.
Hot plugging/unplugging is not allowed for the connector. Doing so could result in electrical
shock, malfunction, or failure.
Do not plug the unspecified connector into the product.
Doing so could cause fire or electrical shock.
Do not use the screws except specified ones. Doing so could result in electrical shock, fire,
malfunction, or failure.
Keep magnetic cards such as a cash card or a credit card away from this product. Failure to
do so could cause loss of magnetic data.
For safety reasons, disconnect the connection cable when the product is not in use for long
periods of time. Do not use thinners for cleaning.
For the safety reasons, unplug the connection cable during the maintenance. Failure to do
so could cause electrical shock.
Do not use thinners for cleaning. The plastic case coating will be dissolved by thinners.
