26
•
UPC-E
X
1
X
2
X
3
X
4
X
5
X
6
C/D
where,
X
1
to X
6
: Data digits
C/D: Check digit
•
CODE39 and ITF (Interleaved 2 of 5)
Data read except for the start/stop codes
•
CODE128 (EAN-128)
Data read except for start/stop codes, FNC codes*, and check digit
*Note that FNC1 placed in any positions except the 1st and 2nd positions
immediately following the start code will be converted into GS (1Dh) and then
transmitted. If FNC1 immediately follows the start code, the code system will
be identified as EAN-128 and the code mark “W” will be used.
•
CODABAR (NW-7)
Data read, including/excluding start/stop codes
You may select whether to transmit the start/stop codes or not, by using the
QR-coded parameter menu.
