Instruction Booklet
13
ENGLISH
KHEOS
EN
5. General operating rules
5.1 Main panel
The following is a description of the unit’s control panel:
Description
1
I/O Main/emergency switch
9
HP (high pressure) valve
2
Control panel
10
Oil filling tank
3
Esc button
11
Used oil discharge tank
4
OK/Enter button
12
High pressure connection
5
Forward/back/plus/minus buttons
13
Low pressure connection
6
High pressure gauge (30 bar)
14
Refrigerant filters
7
Low pressure gauge 15 Bar
15
Printer (Optional)
8
LP (low pressure) valve
16
Oil-UV tracer feed valve
5.2 Operating phases.
Described below are all the steps that the operator must follow to obtain optimal results in perfectly safe conditions, distinguishing
between manual and automatic operation. To check that the unit is operating correctly, an intelligent control device has been
provided to signal faults and warn the operator by means of error messages. An acoustic warning at the beginning of an operation
indicates that the function entered has started in the correct condition, and a second acoustic warning indicates when the operation
has been completed. Before performing the operations described below, to improve system efficiency (in terms of energy and
time) start the vehicle’s engine and let the cooling system run for a few minutes so that the A/C system can reach full power,
i.e. normal operating conditions.
10
11
15
1
3
4
5
7
6
9
2
8
10
11
16
12 ->
14
13 ->
Summary of Contents for Kheos
Page 2: ...EN ...
