manualshive.com logo in svg

Denso BHT-202QW-CE, User Manual

Share
Download
Denso BHT-202QW-CE User Manual Download Page 123

110

 

2.6  Wireless Zero Configuration (WZC) 

 

The screen on the left displays if a wireless local area network 
(wireless LAN) environment has not yet been established following
purchase of the BHT unit. (BHT-202QW-CE only) 

If this screen does not display, double-tap the Wireless Zero 
Configuration status icon in the task tray to display. 

Wireless Zero Configuration status 

 

Indicates that the Wireless Zero Configuration (WZC) radio 
is connected to a wireless network. 

 

Indicates that the Wireless Zero Configuration (WZC) radio 
is not connected to a wireless network. 

Synchronization state 

 

Displays when the wireless device is open. 

 

 

 

Shows the radio field intensity with the number of bars. 

 

 

The WZC menu has the following tabs: 

  IP Information: 

Displays information such as the IP address.

  Wireless Information:  Used to perform wireless communication 

settings. 

 

 

The radio field intensity icons (

, 

, and 

) indicate that 

the radio link is established but do not assure you that there 
will be few communications errors. 

 

 

Summary of Contents for BHT-202QW-CE















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands