manualshive.com logo in svg

Denso BHT-202Q-CE, Operator'S Manual

Share
Download
Denso BHT-202Q-CE Operator'S Manual Download Page 38

 

34 

 

 

Shutdown due to low battery 

 Problem 

When the power is turned on or off or during 
execution of programs (System Mode or 
applications), the battery output level has lowered 
to the extent the BHT can no longer operate. 

If lower battery is detected, the BHT beeps 
five times (for 0.1 second per beep) and 
then turns itself off. Depending upon the 
battery level, the beeper may not sound five 
times. 

 

 Solution 

Replace or recharge the battery cartridge. 
If the grip style BHT is loaded with battery 
cartridges both in the BHT body and the grip, 
replace or recharge both battery cartridges. Always 
remove both battery cartridges, even if you only 
have one fully-charged replacement battery 
cartridge on hand. 

 

 

Service life warning for backup battery 

 

 Problem 

The backup battery has been charged/discharged 
by the specified number of times so that the battery 
capacity lowers below the specified level. 

 Solution 

Replace the backup battery. For the replacement 
procedure, refer to the User's Manual. 

 

Summary of Contents for BHT-202Q-CE













































Reviews:

No comments

Brands by name

Popular brands

Load more brands