23
Cold-booting the BHT
If a problem persists even after warm-booting the BHT, cold-boot the BHT.
Cold-booting the BHT will erase all data stored in the RAM. It is
recommended that important data be saved into the FLASH folder or host
computer.
Cold booting procedure
Turn the BHT off. While holding down the reset button with the stylus, press the
power
key and then release both buttons. Press the
power
key again, and the BHT
cold-boots.
Contents of the memory after warm-/cold-booting the BHT
After warm booting
After cold booting
Data in the FLASH folder
Retained
Retained
Data in other folders
Retained
Erased
Contents of the Registry
Retained
Erased
(Note)
Data being edited
Erased
Erased
(Note)
If the Registry has been backed up*, that backup will apply after cold booting.
*
When the BHT is on, pressing the
power
key
with the
SF/ALP
(
SF
) key held down displays
the screen shown at right and starts backing
up the Registry.
