90
Setting the RF options
Tapping the
Option
tab on the NIC Control menu displays the screen
shown at left.
You can set the following:
Power: Select the power mode for the wireless module.
For details about the parameters above, refer to Chapter 3, Section
3.1.2 "RF-Related Parameters."
Setting the WEP keys
(Authentication: Open)
(40-bit WEP)
Tapping the
WEP
tab on the NIC Control menu displays any of the
following three types of screens according to the authentication type.
- At left:
Open
- Below at left:
Shared key (40-bit WEP)
- On the next page: Shared key (128-bit WEP)
You can set the following:
WEP: Set the authentication system when the WEP is enabled.
Open:
Disable the encryption.
Shared (40-bit): Use a 40-bit WEP key.
Shared (128-bit): Use a 128-bit WEP key.
Key 1 through 4: Define four types of encryption keys--WEP keys
1 to 4. (available only when the Shared (40-bit)
or Shared (128-bit) is selected)
Transmit Key:
Activate any one of the WEP keys 1 through 4
already defined. (available only when the Shared
(40-bit) or Shared (128-bit) is selected)
For details about each parameter, refer to Chapter 3, Section 3.1.2,
"RF-Related Parameters."
To enable the encryption with an WEP key, choose "Shared" in the
WEP box.
For Transmit Key, select an WEP key already defined.
Summary of Contents for BHT-200Q
Page 1: ......
Page 139: ...126 ...
