45
Barcode/2D Code Handy Terminal
5.3 Using the BHT after Long Periods
Data including files and settings stored in the RAM may be lost and the calendar clock may stop if the BHT is left
unused for long periods of time.
The RAM will restore to the factory default. Any important data should be backed up to the “FLASH” folder or to the
computer. The BHT starts from the “Initial Setup” when the BHT turns ON after the data in the RAM is deleted.
Take appropriate measures by following the procedure below.
Insert a fully charged battery.
* Do not remove the battery from the BHT for at least
2 days to charge the backup battery.
Does the normal
screen display?
The BHT can be used.
Charge promptly before
the battery runs out. (*)
The normal screen does
not display.
The "Working" screen is
displayed continuously.
“No system!” screen is displayed.
The "Working" screen is
displayed continuously even after
repeated full reset.
Perform a “full reset”.
Refer to “Chapter 2 BHT
Preparation” – “2.4 Initial
Setup” or "2.6 Resetting
and Full Resetting".
Yes
No
Yes
No
The following reasons may be
considered. Contact the system
administrator.
•
Hardware damage
•
Application failure
Power ON
Does the power turn
ON?
Summary of Contents for BHT-1400BWB-CE
Page 35: ...24 BHT 1400 CE Series...
Page 67: ...58 BHT 1400 CE Series...
Page 71: ...62 BHT 1400 CE Series...
