Chapter 2 Getting Started the BHT and System Menu
Setting the RF options
Tapping the
Option
tab on the NIC Control menu displays the screen
shown at left.
You can set the following:
Power:
Selects the power mode for the
wireless
module.
International Roaming:
This check box should always be
cleared.
For details about the parameters above, refer to Chapter 3, Section
3.1.2 "RF-Related Parameters."
Setting the WEP keys
Tapping the
WEP
tab on the NIC Control menu displays the screen
shown at left.
You can set the following:
WEP:
Sets the authentication system when the WEP is
enabled.
Key 1 to 4:
Defines four types of encryption keys--WEP
keys
1
to
4.
Transmit Key:
Activates any one of the WEP keys 1 to 4 already
defined.
For details about each parameter, refer to Chapter 3, Section 3.1.2,
"RF-Related Parameters."
To enable the encryption with an WEP key, choose "Shared" in the
WEP box.
For Transmit Key, select an WEP key already defined.
71
Summary of Contents for BHT-100BW-CE
Page 1: ...User s Manual Bar Code Handy Terminal BHT 100BW CE...
Page 136: ......
