Denon PMA-A110 Owner'S Manual Download Page 10

Page: 10 / 56

Analog audio connectors (AUDIO IN)
Used to connect devices equipped with analog audio connectors.

“Connecting a playback device” (

p. 17)

“Connecting a recording device” (

p. 18)

SIGNAL GND terminal
Used to connect the ground wire of a turntable. (

p. 17)

Speaker terminals (SPEAKERS)
Used to connect speakers. (

p. 14)

AUDIO OUT connectors
Used to connect the input connector of a recorder. (

p. 18)

EXT.PRE IN connectors
Used to connect a pre-amplifier when this unit is used as a power

amplifier. (

p. 21)

The volume should be adjusted on the connected device.

DIGITAL AUDIO IN connectors
Used to connect devices equipped with digital audio output connectors

and computer.

“Connecting to a device with digital audio output

connectors” (

p. 19)

“Connecting a PC or Mac” (

p. 20)

IR CONTROL connectors
Used to connect Denon network audio players with an IR controller.

AC inlet (AC IN)
Used to connect the power cord. (

Summary of Contents for PMA-A110
























































Search results

Summary of Contents for PMA-A110

Reviews:

Related manuals for PMA-A110

Brands by name

Popular brands

Denon PMA-A110, Owner'S Manual

Search results

Summary of Contents for PMA-A110

Reviews:

Related manuals for PMA-A110

Brands by name

Popular brands