Denon IN-Command AVR-X4000, Service Manual

Page: 30 / 224

Confirmation item FL display settings Contents of confirmationRemarks
A11
Bi-AMP (signal)Path
A 1 1 : A S S I G N - B i A M P
Input Source : CBL/SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Amp assign : 5.1ch (Bi-Amp)
ZONE2 OFF
ZONE3 OFF
·Analog input ⇒ Speaker output (Surround Back L/R)
(
b
As the input source, you can switch from CBL/SAT to other ones.)
A14
Front Height (signal) Path
A 1 4 : F R O N T H E I G H T
Input Source : CBL/SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Amp assign : 7.1ch (SB/FH/FW)
Speaker Select : Front Height
ZONE2 OFF
ZONE3 OFF
·Analog input
⇒
Speaker output (Front Height L/R)
·Analog input
⇒
Preout output (Front Height L/R)
(
b
As the input source, you can switch from CBL/SAT to other ones.)
A15
Front Wide (signal) Path
A 1 5 : F R O N T W I D E
Input Source : CBL/SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Amp assign : 7.1ch (SB/FH/FW)
Speaker Select : Front Wide
ZONE2 OFF
ZONE3 OFF
·Analog input
⇒
Speaker output (Front Wide L/R)
·Analog input
⇒
Preout output (Front Wide L/R)
(
b
As the input source, you can switch from CBL/SAT to other ones.)
A20
Front Amp-Front Heigh (signal) Path
A 2 0 : F - A M P H E I G H T
Input Source : CBL/SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Amp assign : 9.1ch (SB/FH/FW) - Main Pre-amps : Front
Surround Parameter - Speaker Select : SB/FH
ZONE2 OFF
ZONE3 OFF
·Analog input ⇒ Speaker output (Front Height L/R)
·Analog input ⇒ Preout output (Front Height L/R)
(
b
As the input source, you can switch from CBL/SAT to other ones.)
A21
Front Amp-Front Wide (signal) Path
A 2 1 : F - A M P W I D E
Input Source : CBL/SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Amp assign : 9.1ch (SB/FH/FW) - Main Pre-amps : Front
Surround Parameter - Speaker Select : SB/FW
ZONE2 OFF
ZONE3 OFF
·Analog input ⇒ Speaker output (Front Wide L/R)
·Analog input ⇒ Preout output (Front Wide L/R)
(
b
As the input source, you can switch from CBL/SAT to other ones.)
fig.18
fig.19
fig.20
fig.21
fig.22
30