4
Features
Front Panel
1.
Display:
Shows the selected
wireless mic channel.
2.
Up/Down:
Use these buttons to
select the wireless mic channel
that gives a strong signal.
3.
RF/AF LEDs:
The
RF LED
illuminates when a wireless mic
frequency has been matched to
your transmitter. The
AF LED
illuminates when an audio signal
is being received.
4.
Mute Level:
If the AF or RF LEDs flicker or stay on when the wireless
microphone is off, turn the Mute Level screw counter-clockwise until the
LEDs are off. When the Mute Level is properly adjusted, the
corresponding AF and RF LEDs will light up only when the wireless
microphone is being used.
5.
ASC (Auto-Sync Channel):
If you receive interference or if another
channel is needed, select another channel by pressing this button.
6.
IR LED:
This will illuminate when the ASC button is pressed and the
receiver pairs to your wireless mic.
7.
Power-Vol:
Turn this knob clockwise to power on Envoi Receiver 2 and
adjust the volume for the wireless microphone signal.
1
2
3
4
5
7
6
Summary of Contents for Envoi Receiver 2
Page 2: ......