Denon DN-T625, Operating Instructions Manual

Page: 10 / 38

10
ENGLISH
5 NORMAL CD PLAYBACK
1. Press the power operation switch
q
to turn on the
power.
2. Load the disc you want to play.
3. Make the presettings according to the usage
purpose. (See page 18.)
• Select the play finish mode. (Preset functions)
08:Fin=Stop (Finish stop) :
The stop mode (the servo functions turn off) is
set when playback finishes.
08:Fin=Next (Finish next) :
The standby mode is set at the beginning of the
next track when playback is finished.
✽
. After the final track is played, the standby
mode is set at the beginning of the first track.
08:Fin=RCue (Finish recue) :
When playback is finished, the standby mode is
set at the position at which playback was started.
• To standby at the point where the sound begins.
(Preset functions)
Set the “C Det” level.
When a track is selected, the position at which
the sound begins is found when a track is cued
and the standby mode is set at that point.
4. Select the desired play mode
$2
(SINGLE or CONT.)
5. Press the play/pause (
1 3
) button
t
.
(1) Starting playback
Playback can be temporarily halted and then continued
from the same point in the track.
1. Press the play/pause ( 1 3 ) button
t
during
playback.
2. To continue playback, press the play/pause ( 1 3 )
button
t
once more.
(2) Pausing playback at any point
(Pause)
When the CUE button
r
is pressed during the play
mode, the pickup returns to the position at which
playback started and the pause mode is set.
(3) Returning to the position at which
playback started
(Back Cue)
1. Press the stop ( 2 ) button
u
.
(4) Stopping playback
6 ADVANCED CD PLAYBACK
1. Use the number buttons
#9
and the +10 button
#4
to input the number of the desired track.
• For example, to play track number 4, press
,
and to play track number 12,
press and
.
Playback will begin from that track.
(1) Playing a specific track
(Direct search)
1. Turn the select knob (
9
)
!2
clockwise during
playback.
• The pickup will advance to the beginning of the
next track and playback will continue.
Turning the knob several times will forward the
pickup to the corresponding number tracks.
(2) Advancing to the next track
during playback
(Automatic search)
1. Turn the select knob ( 8 )
!2
counterclockwise
during playback.
• The pickup will return to the beginning of the
current track and playback will continue.
Turning the knob several times will return the
pickup to the corresponding number tracks.
(3) Returning to the beginning of the
current track during playback
(Automatic search)
• Using this function, you can search for a desired
point quickly with in a track in the both forward or
reverse direction.
• Release the search button (
6
or
7
)
o
when
the desired point has been reached. Normal
playback then continues.
• When a search button (
6
or
7
)
o
is pressed
during the pause mode and the button is released,
the pause mode is set at that point with the sound
being output.
(4) Audible quick search
(Manual search)
2 Manual search forward
1. Press the search button (forward) (
7
)
o
during
playback.
• Playback of the track is sped up.
2
Manual search in reverse
1. Press the search button (reverse) ( 6 )
o
during
playback.
• Reverse playback of the track is sped up.
With this function, the tracks recorded on the disc can
be played in a completely random order.
• When the RANDOM button
#7
is pressed, the
“RAND” indicator lights and random play begins
automatically.
• If the RANDOM button
#7
is pressed when the
repeat function is set, the tracks will be played
through once in random order, then played through
again in a different order, etc..
(5) Playing in random order
(Random play)
• Start playback and set the REPEAT switch
$1
to the
“ON“ position.
(6) Repeating playback of a desired
interval
(Repeat)
1. During playback, press the A-B button
#6
at the
point where you want to start repeated playback (A
point).
• The “A-B” indicator flash on the display.
2. Press the A-B button
#6
again at the point where
you want to end repeated playback (B point).
• The “A-B” indicator stops flashing (remaining lit),
and the A-B section begins playing repeatedly.
• If no B point it set, the end of the current track is
set as the B point when in the single mode, and
the end of the disc is set as the B point when in
the “continue” mode.
3. To cancel A-B repeat playback, press the A-B button
#6
again.
(7) To play the set section repeatedly
(A-B repeat)
NOTES :
• A-B repeat playback is possible even when the
REPEAT switch
$1
is set to the “OFF” position.
• Set the A and B points at least 1 second apart
from each other.
Press the
1 3 button
Play internal Play internal
Press the
1 3 button
Press the
CUE button
Press the 1 3 button
Back cue operation
Position
on the disc
• Auto Cue (Preset functions)
Auto cue is automatically cued to the point
where audio starts.
Cueing takes place at the point where audio
starts rather than where the track starts. The
level at which sound is first detected can be set
between –36 to –48 dB (3 steps).
• End of Message (EOM)
(Preset functions)
At the end of the track, the time display flashes,
providing a visual warning to the operator that
the track will end shortly. The point at which the
flashing beings can be set within a range of 0 to
60 seconds (7 steps) prior to the end of the
track.
• Sleep mode
(Preset functions)
The sleep mode is set if no operation is
performed for set-up time in the standby, pause
or manual search mode.
When in the sleep mode, if the PLAY/PAUSE
button is pressed, playback will be started from
the beginning of the track in which the sleep
mode was set. If the CUE button is pressed, it
will standby for the beginning of the track in
which the sleep mode was set.
NOTE :
• The random play mode cannot be set while in
the play mode or the program mode.