12
ENGLISH
6
SCRATCH
w
e
q
1
Select Scratch source
q
Select the source to be
scratched using the
SCRATCH source select
knob.
• If scratching is possible, the LED for the
selected source flashes.
• If scratching is not possible immediately,
because for example the Sampler or
Alpha-Track settings have not been
made, the LED for the selected source
lights without flashing.
SEARCH
MAIN
SAMP.
TRACK
You can Scratch in CD or Sampler mode. Also you can select the Scratch sound direction to (turn direction of
Scratch Disc), both and forward. These selections give you variety of Scratch effects.
2
Select Scratch direction
w
Select the direction for
scratching using the
SCRATCH direction select
knob.
FWD
BOTH
3
[Scratch Disc]
e
When MAIN is selected as
the Scratch mode and
Scratch Disc is turned by
hand, the Main Track is
scratched.
When Alpha-Track is selected as the
Scratch mode and Scratch Disc is turned by
hand, the Alpha-Track is scratched.
When SAMPLER is selected as the Scratch
mode and Scratch Disc is turned by hand,
the sample is scratched.
• The disc can be ejected while still Main Track playing.
Main Hot Disc
1
2
Data loading
When the
!0
DISC EJECT button
is pressed for more than 1
second and held in while the
Main Track is playing, up to 35
seconds of subsequent data can
be read. (at 0% pitch)
• If a Seamless Loop of within 35 seconds is
playing, loop playback continues.
NOTE:
The Hot Disc function cannot be used
when both the Main Track and Alpha-
Track are playing.
When the Hot Disc function is started,
the Sampler data and points A and B
aside from the points for the currently
playing loop are cleared.
Eject
• Once data loading is completed, the disc is
ejected.
• The operating buttons switch to the Alpha-
Track controls.
(
13
→
a
13
, CUE
→
a
CUE,
A1
→
A3, A2
→
A4,
and Loop control buttons.)
HOT DISC
3
4
Disc loading and Cue search
• Load a new disc.
• Operate as usual, and cue to the beginning
of a track or match the beat.
At this time, the disc’s playback signals are
output from the ALPHA OUTPUT terminals.
Change output
Once cueing is completed, stop
playback, and when the
#2
a
MODE button is pressed output
of the disc’s playback signals
switches from the ALPHA OUT
to the MAIN OUT terminals.
• Start playback from the disc and stop Hot
Disc playback.
MIRROR MIX
5
Hot Disc clear
When the
#3
a
CUE button is pressed while
pressing the
#6
a
PITCH BEND – button, the
Hot Disc mode is turned off and the player is
set back to the normal mode.
NOTE:
The
a
MODE button does not function
before the Hot Disc data is cleared.
PITCH BEND
SAMP. STOP
Summary of Contents for DN S5000 - DJ Table Top Single CD Player
Page 2: ......
