4
Features
Front Panel
1.
Power Button:
Press this button to power DN-508MX on or off.
2.
Display:
This screen indicates the current settings, status, etc.
3.
Volume
/
Sel:
Turn the knob to navigate or scroll through the options shown in the display,
and then press the knob to select one.
4.
Menu:
Press this button to switch between the Menu and the settings of the current zone
in the display. In the Menu, turn the
Volume
/
Sel
knob to navigate or scroll through the
available options, and then press the knob to select
it.
5.
Mute
/
Back:
When viewing the settings of the current zone, press this button to select the
Mute
setting. To mute or unmute the zone, turn the
Volume
/
Sel
knob to select
Mute
or
Unmute
, and then press it to confirm your choice.
When in the Menu, press this button to return to the previous screen.
6.
Aux In
(
1
/
8”
/
3.5 mm
)
:
Use a standard stereo 1/8” (3.5 mm) cable to connect an optional
audio source to this stereo input. When a cable is connected to this input, the
Aux In RCA
inputs
on the rear panel will be disabled.
7.
Mic
/
Line Indicators:
These lights will illuminate different colors to show the signal status
of each mic/line input:
•
Off:
The input is receiving no signal or a very low-level signal.
•
Green:
The input is receiving a signal at an optimal level.
•
Amber:
The input’s signal is very high.
•
Red:
The input’s signal is “peaking” (higher than 0 dB). Decrease its
Gain
knob on
the rear panel or decrease the volume of the source to prevent “clipping” (distortion).
8.
Source Indicators:
These lights will illuminate different colors to show the signal status of
the aux in and ST inputs:
•
Off:
The input is receiving no signal or a very low-level signal.
•
Green:
The input is receiving a signal at an optimal level.
•
Amber:
The input’s signal is very high.
•
Red:
The input’s signal is “peaking” (higher than 0 dB). Decrease the volume of the
source to prevent “clipping” (distortion).
9.
Source Selectors:
Press one of these buttons to assign or unassign that source to the
currently selected zone. When a source is assigned to the zone, its button will be lit amber.
To select a zone, press one of the
output selectors
.
10.
Output Indicators:
These lights will illuminate different colors to show the signal status of
the line outputs (zone outputs):
•
Off:
The output is sending no signal or a very low-level signal.
•
Green:
The output is sending a signal at an optimal level.
•
Amber:
The output’s signal is very high.
•
Red:
The output’s signal is “peaking” (higher than 0 dB). Decrease the volume of the
zone to prevent “clipping” (distortion).
11.
Output Selectors:
Press one of these buttons to select that zone. The button for the
currently selected zone will be lit amber.
1
2
3
4
5
6
7
8
9
10
11
DVD
CD
Dining
Room L
Dance
Hall L
Kitchen
Dance
Hall R
Dining
Room R
Phone
Summary of Contents for DN-508MX
Page 2: ......