Denon DN-2500F, Operating Instructions Manual

Page: 24 / 30

( 3) Recalling data
When a custom setting memory disc is set in the player, the
flashes, indicating that there is a memory.
Use the TRACK >>l
and l<< buttons to select the track whose data
you want to recall.
appears in the memory section of the display after the track is se-
l ected.)
Press the CD 1 (or CD 2) button while pressing the MEMO CALL button.
(The memory number (0 to 199) of the recalled data flashes for approxi-
mately 3 seconds in the key section of the display.)
The data is recalled and the pickup moves to the cue point stored in the
memory.
(The CUE button's LED lights. If seamless loop data is stored, the LOOP,
A and B button's LEDs also light.)
I n addition, the playback pitch is fixed to the registered playback pitch.
(The pitch LED flashes.)
NOTE:
The track starting position changes through audio detection,
so the time display of the called out cue point, A point and B
point may be different from when the points were stored in the
memory.
( 4)
Clearing data
Use the TRACK >>l
and l<< buttons to select the track whose
data you want to clear.
appears in the memory section of the display after the track is se-
l ected.)
i ndicator
25