Denon DN-2500F, Operating Instructions Manual

Page: 17 / 30

After this, the section between the starting point (A) and the ending point
( B) is played repeatedly with no interruption in the sound.
Alternative way to set the seamless loop starting point (A) and ending point (B)
While the disc is playing, press the LOOP and B buttons. The last cue point is set as point A, and seamless loop playback
begins.
After setting point A, set the cue mode, press button A, then use the scan or search function to fine-adjust point A. (The same
can be done for point B.)
(2)
Leaving the seamless loop mode temporarily
Figure 18
Press the EXIT/RELOOP button while playing a seamless loop.
( The LOOP button's LED starts flashing.)
When the ending point (B) is reached, playback continues without return-
i ng to the starting point (A).
(3)
Replaying a seamless loop
Press the EXIT/RELOOP button or button B during normal playback.
(The LOOP button's LED stops flashing, remaining lit.)
(The position at which button B is pressed is set as the new loop playback
ending point (B)).
Playback returns to the starting point (A) and seamless loop playback be-
gins.
(4)
Switching from seamless loop playback to normal disc playback
( Setting the normal playback mode without canceling the starting and ending points)
Press the LOOP button within 1 second.
( The LOOP button's LED turns off.)
The normal playback mode is set.
( Only the loop mode is canceled. Points
A
and B are not cleared.)
NOTE:
The starting point (A) and ending point (B) settings are canceled when the disc is removed from the player.
18
When the ending point (B) is set, playback starts from the starting point
( A) with no interruption in the sound.