6
4.
Use XLR cables or 1/4” (6.35mm) cables to connect your DN-202WR’s
outputs
(balanced or unbalanced) to your loudspeakers, mixer,
amplifier, or other device that accepts line-level inputs (make sure this
device is powered
off
).
5.
Use the included
power adapter
to connect DN-202WR’s
power
input
to a power outlet. It will power on immediately.
6.
Connect your loudspeakers, mixer, amplifier, or other output device to
a power outlet, but do
not
power it on yet.
7.
Press and hold the
Pair
button on DN-202WT for 3 seconds. Its
Status Light
will start flashing rapidly.
8.
Within approximately 15 seconds, press and hold the
Pair
button on
DN-202WR for 3 seconds. Its
Status Light
will start flashing rapidly.
If you need to pair multiple DN-202WR units to DN-202WT, do this
step with all of them within the 15 seconds.
9.
Wait until the
Status Lights
on both DN-202WT and DN-202WR are
solidly lit (not flashing), indicating that they are paired.
10.
Power on your loudspeakers, mixer, amplifier, or other output devices.
You can now use DN-202WT and DN-202WR to play audio wirelessly.
