AUTO STANDBY
When there is no input signal and operation for 15 minutes, this unit
automatically enters the standby mode.
ON:
The unit goes into standby after 15 minutes.
OFF
(Default)
:
The unit does not go into standby
automatically.
0
For the input source “ANALOG IN” only, when no operation is performed for eight
hours, this unit automatically enters the standby mode.
0
In the following situations, the Auto standby function does not operate.
0
When an iPod (From iPod) is connected to the USB port on the unit.
0
When the source is “TUNER”.
0
The default setting for the Auto Standby mode is “OFF”.
CLOCK MODE
The clock is constantly displayed.
ON:
Display the clock.
Press the POWER
X
button to switch
between the clock display and the normal
display.
OFF
(Default)
:
Does not display the clock.
NOTE
0
When CLOCK MODE is set to ON, this unit consumes the same amount of power
as when it is turned on.
52
