Setting the preset channels and
changing the received frequency on
the main unit
8
/–, +/
9
on the main unit can be used both for switching the preset
channel and for tuning.
Before operating them, switch the main unit to the “preset mode” or “tuning
mode” using the procedure below.
1
Press SETUP.
2
Use
ui
to select “TUNER SETUP”, then press ENTER.
3
Use
ui
to select “MODE SELECT”, then press ENTER.
4
Use
ui
to select “PRESET MODE” or “TUNING MODE”,
then press ENTER.
PRESET MODE:
Press
8
/–, +/
9
on the main unit to
switch preset channels.
0
This is the same operation as
CHANNEL –, + on the remote control
unit.
TUNING MODE:
Press
8
/–, +/
9
on the main unit to
changethe received frequency.
0
This is the same operation as TUNE
–, + on the remote control unit.
35
