Denon DHT-589BA, Owner'S Manual

Page: 39 / 78

Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
Press
[MEMORY]
.
3
Press
SHIFT
to select the block (A to G) in which the
station is to be preset.
4
Press
<PRESET CHANNEL>
or
[CHANNEL + –]
to
select the preset number (1 to 8).
5
Press
[MEMORY]
again to complete the setting.
• To preset other stations, repeat steps 1 to 5.
• Stations can be preset automatically at “System Setup” – “Input
Setup” – “Auto Preset Memory” (
v
page 24).
NOTE
Preset stations are erased by overwriting them.
1
Press
SHIFT
to select the memory block (A to G).
2
Press
<PRESET CHANNEL>
or
[CHANNEL + –]
to
select the desired preset channel (1 to 8).
n
Default settings
Auto tuner presets
A1 ~ A8
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 ~ B8
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
90.1 / 90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8 90.1 MHz
Listening to Preset Stations
1
Either turn
<SOURCE SELECT>
or press
[TUNER]
to
select “TUNER”.
2
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE
CONTROL 2]
to “TUNER”.
( v page 42 “Remote Control Unit Operations”)
3
Press
BAND
to select “FM” or “AM”.
4
Tune in the desired broadcast station.
q
To tune in automatically (Auto Tuning)
Press
[MODE]
to light the “AUTO” indicator on the display, then
use
TUNING
to select the station you want to hear.
w
To tune in manually (Manual Tuning)
Press
[MODE]
to turn off the display’s “AUTO” indicator, then use
TUNING
to select the station you want to hear.
Listening to FM/AM Broadcasts
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
TUNING
to change
frequencies continuously.
Basic Operation
Getting Started
Connections
Setup
Playback
Remote Control
Information
Troubleshooting
ENGLISH
Specifications