ENGLISH
7
MULTI ZONE / QUICK ACCESS
CD CHANGER
PCM AUDIO TECHNOLOGY / 100 CD CHANGER
DCM-5001
ON / STANDBY
¢
£
OFF
DOOR OPEN
1
DIGITAL COAX IN
DAISY CHAIN IN
REMOTE CONTROL IN
2
1
2
ANALOG OUT
R
L
CONTROL
EXTERNAL
¢
RS232C
£
RS422A
ATTENTION
ATTENTION
DIGITAL COAX OUT
DAISY CHAIN OUT
1
2
1234
CONTROL
DAISY CHAIN
MODE SWITCH
1
0
2
1
The internal mechanisms are locked in place with shipping
screws to protect them from shocks and vibrations. Be sure to
remove the shipping screws (three) before using the player.
1
Turn the three shipping screws on section A of the rear
panel counterclockwise and remove them.
1
Remove all the CDs from the disc rack following the
procedure described under “Loading CDs” (page 8).
4
Press the power operation switch (
¢
ON/STANDBY) while
pressing in the DOOR OPEN button to turn the power on.
Press and hold in the DOOR OPEN button. The DOOR
OPEN LED starts flashing (green).
3
Press the power operation switch (
¢
ON/STANDBY) to
turn the power off.
6
Press the power operation switch (
¢
ON/STANDBY) to
turn the power off.
5
When the DOOR OPEN LED stops flashing (remaining lit),
release the button, remove the three shipping screws from
section B of the rear panel, put them in the holes in section
A, then tighten them to lock the internal mechanism in
place.
2
2
Fasten the removed shipping screws in the holes in section
B.
* The shipping screws and rubber washers will be
needed when shipping the player in the future, so be
sure to fasten them to the holes in section B so as
not to lose them.
1234
1
DIGITAL COAX IN
DAISY CHAIN IN
DIGITAL COAX OUT
DAISY CHAIN OUT
REMOTE CONTROL IN
2
1
2
1
2
ANALOG OUT
R
L
CONTROL
DAISY CHAIN
CONTROL
EXTERNAL
MODE SWITCH
¢
RS232C
£
RS422A
1
0
ATTENTION
ATTENTION
1
2
Shipping screws
[When moving the player]
When shipping the player, be sure to protect the internal
mechanisms from shocks and vibrations using the procedure
described below.
Close the front cover.
Section
A
INSTALLATION
5
Removing the Shipping Screws
Section
B
Section
B
Section
A
Shipping screws
