27
ENGLISH
3. DEVICE OPERATION
3. Press the
jog wheel
. The Display switches to the track
number flashing.
4. Turn the
jog wheel
until the track number you want to
upload is flashing.
5. Press the
jog wheel
. “Executing” will be displayed
until Upload Track is finished. Then “Completed” will be
displayed.
• Display returns to step 4 so you can upload another
track.
6. Press the
STOP/CANCEL
button to cancel.
[ Using the remote control unit ]
1. While in stop or play-pause mode, press the
UTILITY
button.
2. Press the
3
button or the
4
button until “Upload Track”
appears in the display.
3. Press the
ENTER
button. The Display switches to the
track number flashing.
4. Press
the
3
button or the
4
button until the track number
you want to upload is flashing.
5. Press the
ENTER
button. “Executing” will be displayed
until Upload Track is finished. Then “Completed” will be
displayed.
Display returns to step 4 so you can upload another
6. Press the
STOP
button to cancel.
(4) Procedure for Displaying the Unit’s F/W
Version
[ Using the front panel ]
1. While in stop and shift mode, press the
MENU/STORE/
UTILITY
button.
2. Turn the
jog wheel
until “FW version” appear in the
display.
3. Press the
jog wheel
. The Display switches to the
firmware version.
4. Press the
STOP/CANCEL
button to cancel.
[ Using the remote control unit ]
1. While in stop mode, press the
UTILITY
button.
2. Press the
3
button or the
4
button until “F/W version”
appear in the display.
3. Press the
ENTER
button. The Display switches to the
firmware version.
4. Press the
STOP
button to cancel.
(5) Procedure for Displaying the Unit’s
Drive Version
[ Using the front panel ]
1. While in stop and shift mode, press the
MENU/STORE/
UTILITY
button.
2. Turn the
jog wheel
until “Drive version” appear in the
display.
3. Press the
jog wheel
. The Display switches to the
firmware version.
4. Press the
STOP/CANCEL
button to cancel.
[ Using the remote control unit ]
1. While in stop mode, press the
UTILITY
button.
2. Press the
3
button or the
4
button until “Drive Version”
appear in the display.
3. Press the
ENTER
button. The Display switches to the
firmware version.
4. Press the
STOP
button to cancel.
(6) Procedure for Displaying the Unit’s IP
Address
[ Using the front panel ]
1. While in stop and shift mode, press the
MENU/STORE/
UTILITY
button.
2. Turn the
jog wheel
until “IP Address” appear in the
display.
3. Press the
jog wheel
. The display switches to the IP
address.
4. Press the
STOP/CANCEL
button to cancel.
[ Using the remote control unit ]
1. While in stop mode, press the
UTILITY
button.
2. Press the
3
button or the
4
button until “IP Address”
appear in the display.
3. Press the
ENTER
button. The Display switches to the IP
Address.
4. Press the
STOP
button to cancel.