o
Recording custom macro operations
1
Press and hold RC SETUP for more than 3 seconds.
“SETUP” and
p
indicator flashes twice on the remote control unit.
2
Use
ui
to display “MACRO” on the remote control unit
and press ENTER.
3
Use
ui
to display “MAN” on the remote control unit
and press ENTER.
4
When “MCNo” appears on the remote control unit,
press the MACRO A – D button that you want to set.
5
Press the buttons to be stored one by one.
The step number for the storing procedure and mode are alternately
displayed on the remote control unit.
NOTE
0
You cannot store the macros for the ZONE SELECT button.
6
Press RC SETUP to exit the macro function.
“OK” flashes four times on the remote control unit and the normal
operation mode is restored.
281
