REPAIR INFORMATION
HDMI "Rx/Tx" Failure Detection
2. Preparations for checking HDMI Switcher reception/transmission register
3. Starting detecting the point of failure
4. Device implementation location
CLOCK FLOW & WAVE FORM IN DIGITAL
2. PANEL / REMOTE LOCK Selection Mode
3-1. Selecting the Mode for Service-related
3-2. Protection History Display Mode
3-3. 232C Standby Clear Mode (AVR-X2500H E3 Only)
3-5. TUNER STEP mode (E2 / E3 only)
5. Network Initialization Mode
6. Clearing the Operation Info
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
77