63
ENGLISH
Basic version
Simple version
Information
Advanced version
Setting items
Setting details
GUI
(Continued)
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text
: Display the details of operation when switching surround mode,
input mode, etc.
•
ON
: Turn display on.
•
OFF
: Turn display off.
Master Volume
: Display the master volume during adjustment.
•
Bottom
: Display at the bottom.
•
Top
: Display at the top.
•
OFF
: Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to “Top”.
USB
: Set the USB screen display time when the input source is “USB/
iPod”.
•
Always
: Show display continuously.
•
30sec
: Show display for 30 seconds after operation.
•
10sec
: Show display for 10 seconds after operation.
•
OFF
: Turn display off.
iPod
: Set the iPod screen display time when the input source is “DOCK”
or “USB/iPod”.
•
Always
: Show display continuously.
•
30sec
: Show display for 30 seconds after operation.
•
10sec
: Show display for 10 seconds after operation.
•
OFF
: Turn display off.
TUNER
: Set the tuner screen display time when the input source is “HD
Radio”.
•
Always
: Show display continuously.
•
30sec
: Show display for 30 seconds after operation.
•
10sec
: Show display for 10 seconds after operation.
•
OFF
: Turn display off.
Remote Preset Codes
Search a preset code to
register in the remote
control unit.
See “Registering preset codes” (
v
page 65).
Quick Select Name
Change the “Quick Select”
display title to one you prefer.
• Up to 16 characters can be input.
• For character input, see page 45.
Zone Rename
Change the display title of
each zone to one you prefer.
• Up to 10 characters can be input.
• For character input, see page 45.
Setting items
Setting details
Trigger Out
Select the condition for
activating Trigger Out for
the input source, surround
mode, etc.
See “TRIGGER OUT jacks”
(
v
page 20) for more
information on trigger out.
Trigger Out
n
When setting for zone (MAIN ZONE / ZONE2)
Trigger out is activated through linkage to the power of the zone set
to “ON”.
n
When setting for input source
Activate trigger out when the input source set to “ON” is selected.
Active for the zone set to “ON” with “When Setting for Zone”.
n
When setting for surround mode
Activate trigger out when the surround mode set to “ON” is selected.
Active when the “MAIN ZONE” set to “ON” with “When Setting
for Zone” is selected, and when the input source set to “ON” with
“When Setting for Input Source” is selected.
•
ON
: Activate trigger on this mode.
•
– – –
: Do not activate trigger on this mode.
Default
: The “Trigger Out” settings are returned to the default settings.
•
Yes
: Reset to the defaults.
•
No
: Do not reset to the defaults.
Remote ID Setup
Used when receiving
maintenance from a DENON
service engineer or custom
installer.
1
/
2
/
3
/
4
NOTE
Only use this function if so instructed by a DENON serviceperson or installer.
Dimmer
Adjust the display
brightness of this unit.
Bright
: Normal display brightness.
Dim
: Reduced display brightness.
Dark
: Very low display brightness.
OFF
: Turns the display off.
Buttons on the main unit can be used for
operations.
Each time
DIMMER
is pressed, the setting is
changed as shown below.
Bright
Dim
Dark
OFF
Setup Lock
Protect settings from
inadvertent change.
ON
: Turn protection on.
OFF
: Turn protection off.
When canceling the setting, set “Setup Lock” to “OFF”.
NOTE
When “Setup Lock” is set to “ON”, the settings listed below can no
longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt
to operate related settings.
· Menu operations
· Channel Level
· RESTORER
· MultEQ®
· Dynamic Volume®
· Dynamic EQ®
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting
Return to previous menu
Manual Setup
