Denon AVR-2311CI, Owner'S Manual

Page: 56 / 95

53
ENGLISH
Basic version
Simple version
Information
Advanced version
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
Audio/Video Adjust
Setting items Setting details
S.Back
Sets the method of
generating of the surround
back channel.
n
For 2-channel sources
ON : The surround back channel is used.
OFF : No signal is played from the surround back channels.
n
For Multi-channel sources
Set the decoding method for the surround back channel.
DSCRT ON : Play the surround back signals included in the 7.1-channel
source.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
ES MTRX
z
1
: Generate and play the surround back signals from the
surround channel signals of the DTS source.
ES DSCRT
z
2
: Play the surround back signals included in the
6.1-channel DTS source.
PL
g
x C
z
3
: Generate and play the surround back signals by decoding
the signals in the Dolby Pro Logic
g
x Cinema mode.
PL
g
x M : Generate and play the surround back signals by decoding the
signals in the Dolby Pro Logic
g
x Music mode.
OFF : Do not play the surround back channel.
z
1 This can be selected when playing DTS sources.
z
2 This can be selected when playing DTS sources including a signal to
identify discrete 6.1-channel signals.
z
3 This can be selected when “Speaker Config.” – “S.Back” (
v
page 58)
is set to “2spkrs”.
• This can also be set by pressing
STANDARD
.
• If the source being played contains a surround
back signal, the decoder type is automatically
selected by the AFDM function. Set “AFDM” to
“OFF” to switch to your preferred decoder.
NOTE
If the setting in “Speaker Config.” – “S.Back” (
v
page 58) is “None”,
“S.Back” is not displayed.
F.Height
Determine whether to use
front height channel.
ON : Audio is output from the front height speaker.
OFF : Audio is not output from the front height speaker.
NOTE
• “F.Height” is displayed for the following settings.
• When “Amp Assign” (
v
page 57) is set to “Front Height”.
• When the “Speaker Config.” – “F.Height” setting (
v
page 58) is set to
other than “None”.
• “F.Height” cannot be set if the HD Audio source being played includes a
front height channel. In this case, the Front height channel is played back
without decoding in PL
g
z mode, using the input signal.
Setting items Setting details
Height Gain
Control the front height
channel volume.
Low : Reduce the front height channel volume.
Mid : Front height channel sound is output with standard sound volume.
High : Increase the front height channel volume.
NOTE
“Height Gain” is displayed for the following settings.
• When “Amp Assign” (
v
page 57) is set to “Front Height”.
• When the “Speaker Config.” – “F.Height” setting (
v
page 58) is set to
other than “None”.
• When surround mode is “PL
g
z” or the PL
g
z decoder is used.
Subwoofer
Turn subwoofer output on
and off.
ON : The subwoofer is used.
OFF : The subwoofer is not used.
NOTE
This can be set when the surround mode is “DIRECT” (
v
page 30), “PURE
DIRECT” (
v
page 30) and the “SW Mode” (
v
page 58) is “LFE+Main”.
Default
The “Surround Parameter”
settings are returned to the
default settings.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
n
Tone
Adjust the tonal quality of the sound.
Setting items Setting details
Tone Control
Set the tone control function
to ON and OFF.
ON : Allow tone adjustment (bass, treble).
OFF : Playback without tone adjustment.
“Tone Control” can be set when “Dynamic EQ” (
v
page 54) is set to
“OFF”.
NOTE
• “Tone Control” settings are not reflected to ZONE2.
• The tone cannot be adjusted in the direct mode.
Bass
Adjust low frequency range
(bass).
–6dB – +6dB
“Bass” can be set when “Tone Control” is set to “ON”.
Treble
Adjust high frequency range
(treble).
–6dB – +6dB
“Treble” can be set when “Tone Control” is set to “ON”.