31
ENGLISH
Advanced version
Simple version
Information
Basic version
DENON original surround playback
1
Playing the source (
v
page 22
–
28).
2
Press
SIMULATION
to select the
surround mode.
• Each time
SIMULATION
is pressed, the
surround mode is switched.
MULTI CH
STEREO
This mode is for enjoying stereo sound from all
speakers.
ROCK ARENA
This mode is for enjoying the atmosphere of a live
concert in an arena.
JAZZ CLUB
This mode is for enjoying the atmosphere of a live
concert in a jazz club.
MONO MOVIE
z
This mode is for playing monaural movie sources
with surround sound.
VIDEO GAME
This mode is suited for achieving surround sound
with video games.
MATRIX
This mode lets you add a spacious feel to stereo
music sources.
VIRTUAL
This mode is for enjoying surround effects using
only the front speakers or headphones.
z
When playing sources recorded in monaural in the “MONO
MOVIE” mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD
or DTS Express, you cannot select DENON original surround mode.
Stereo playback
This is the mode for playing in stereo. The tone can be adjusted.
• Sound is output from the front left and right speakers and subwoofer.
• If multichannel signals are input, they are mixed down to 2-channel
audio and are played.
1
Playing the source (
v
page 22
–
28).
2
Press
D/ST
to select “STEREO”.
Stereo playback begins.
Direct playback
Sound recorded in source is played as is.
• Surround back signals or front height signals are not created.
• In this mode, the following items cannot be adjusted.
• Tone (
v
page 54)
• MultEQ® (
v
page 55)
• Dynamic EQ® (
v
page 55)
• Dynamic Volume® (
v
page 56)
• RESTORER (
v
page 57)
1
Playing the source (
v
page 22
–
28).
2
Press
D/ST
to select “DIRECT”.
Direct playback begins.
Pure direct playback
This mode is for playback in higher sound quality than in “Direct
playback” mode.
• The following circuits that affect sound quality are set to off.
• Main unit’s display circuit (The display is turned off.)
• Analog video input/output circuit
• Surround back signals or front height signals are not created.
• In this mode, the following items cannot be adjusted.
• Tone (
v
page 54)
• MultEQ® (
v
page 55)
• Dynamic EQ® (
v
page 55)
• Dynamic Volume® (
v
page 56)
• RESTORER (
v
page 57)
1
Playing the source (
v
page 22
–
28).
2
Press
PURE
.
The display goes dark, and pure direct
playback begins.
• To cancel, press
PURE
again.
• Video signals are only output when HDMI signals are played in the
PURE DIRECT mode.
• If
PURE DIRECT
on the main unit
is pressed, the same function as
with the remote control unit can be
obtained.
NOTE
When in the PURE DIRECT mode, the menu screen is not displayed.
