22
ENGLISH
(Main unit)
1
Turn the SELECT knob to select the surround
mode.
1, 3
2
1
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to
set.
• The parameters which can be set differ for the different surround modes. (Refer to
“Surround Modes and Parameters” on page 23.)
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB,
VIDEO GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal
encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal
switches to a DTS signal, the mode automatically switches to DTS surround.
• Operating the surround mode and surround parameters from the main unit‘s panel.
• When turned clockwise
• When turned counterclockwise
STEREO
DOLBY PRO LOGIC
II
5CH STEREO
MONO MOVIE
JAZZ CLUB
ROCK ARENA
VIDEO GAME
MATRIX
VIRTUAL SURROUND
STEREO
DOLBY PRO LOGIC
II
5CH STEREO
MONO MOVIE
JAZZ CLUB
ROCK ARENA
VIDEO GAME
MATRIX
VIRTUAL SURROUND
To select the surround mode while adjusting the surround parameters, channel volume or tone control,
press the SURROUND MODE button then operate the selector.
(Main unit)
(3) DELAY TIME
Use the
(left) and
(right) buttons to set the delay time.
(Remote control unit)
DELAY 30ms
110ms
30ms
0ms
(Initial)
(left) button
(right) button
(4) D. COMP.
Use the
(left) and
(right) buttons to set the D. COMP.
(Remote control unit)
D.COMP. OFF
OFF
LOW
MID
HIGH
(Initial)
(left) button
(right) button
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
(5) LFE
Use the
(left) and
(right) buttons to set the LFE.
(Remote control unit)
LFE 0dB
-10dB
-5dB
0dB
(Initial)
(left) button
(right) button
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
(6) DEFAULT
To reset the settings to the factory defaults, use the
(left) and
(right)
buttons to display “Yes”.
(Remote control unit)
DEFAULT Y/N
NO
Y/N
YES
(left) button
(right) button
NOTE:
When making parameter settings, the display will return to the regular condition several seconds
after the last button was pressed and the setting will be completed.
Surround parameters
e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”.
“small” recreates a small sound field, “large” a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. When the surround mode is set to “VIRTUAL”, the effect level
can be set in steps from 1 to 10. Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
Press the surround parameter button to switch to the ROOM SIZE, DELAY, EFFECT LEVEL setting.
Summary of Contents for AVR-1404/484
Page 90: ...90 MEMO...
Page 91: ...91 MEMO...
