Denon AVC-X6700H Owner'S Manual Download Page 229

Page: 229 / 342

9.1ch + ZONE3:

Setting to assign the power amplifiers in

this unit for ZONE3 to 2-channels

You can connect speakers for up to 9.1-

channels for MAIN ZONE.

7.1ch + ZONE2/3:

Setting to assign the power amplifiers

within this unit for ZONE2 and ZONE3

each to two different channel.

You can connect speakers for up to 7.1-

channels for MAIN ZONE.

9.1ch + ZONE2/3-MONO:

Setting to assign the power amplifiers in

this unit for ZONE2 and ZONE3 each to

a different channel.

You can connect speakers for up to 9.1-

channels for MAIN ZONE.

9.1ch (Bi-Amp):

Setting to assign the power amplifiers in

this unit for front speaker bi-amp

connection to 2-channels.

You can connect speakers for up to 9.1-

channels for MAIN ZONE.

7.1ch (Bi-Amp) + ZONE2:

Setting to assign the power amplifiers

in this unit for front speaker bi-amp

connection to 2-channels.

Setting to assign the power amplifiers

in this unit for ZONE2 to 2-channels.

5.1ch Full Bi-Amp:

Setting to assign the power amplifiers

in this unit for front, center and

surround speakers to 10 channels.

You can connect speakers for up to

5.1 channels for MAIN ZONE.

9.1ch + Front B:

Setting to assign the power amplifiers

within this unit for connecting the

second set of front speakers.

You can switch between the desired

combination of front speakers A and

front speakers B.

Switch the front speaker using the “Front

Speaker” setting. (

p. 247)

Pre Amplifier:

All of the speakers are connected

using an external power amplifier and

this unit is used as a pre amplifier.

229

Summary of Contents for AVC-X6700H






















































































































































































































































































































































Search results

Summary of Contents for AVC-X6700H

Reviews:

Related manuals for AVC-X6700H

Brands by name

Popular brands

Denon AVC-X6700H, Owner'S Manual

Search results

Summary of Contents for AVC-X6700H

Reviews:

Related manuals for AVC-X6700H

Brands by name

Popular brands