Denon AVC-X6700H Owner'S Manual Download Page 12

Page: 12 / 342

Auro-3D
This unit is equipped with an Auro-3D decoder.

With Auro-3D, Front Height (FHL + FHR), Surround Height (SHL + SHR), Center Height (CH/optional) and Top Surround (TS/optional) are added to a

conventional 5.1-channel system to achieve a natural and realistic sound field that is three-dimensional and fully immersive.

You will be able to fully enjoy Auro-3D playback if you properly place the speakers for Auro-3D.

Auro-3D playback

FHL

FHR

SHL

SHR

Dolby Atmos playback

FHL

FHR

SHL

SHR

Auro-3D does not support a Dolby Atmos configuration using Top Front, Top Middle or Top Rear speakers.

But it is possible to support both an Auro-3D and Dolby Atmos by adding Front Height and Rear Height speakers* to a 5.1 configuration.

For an optimum Auro-3D experience Surround Height speakers are strongly recommended.

Summary of Contents for AVC-X6700H






















































































































































































































































































































































Search results

Summary of Contents for AVC-X6700H

Reviews:

Related manuals for AVC-X6700H

Brands by name

Popular brands

Denon AVC-X6700H, Owner'S Manual

Search results

Summary of Contents for AVC-X6700H

Reviews:

Related manuals for AVC-X6700H

Brands by name

Popular brands