4
4.
Status Light:
This LED indicates the DN-202WR’s pairing status:
•
Flashing slowly
(approximately once per second)
:
DN-202WR is
not paired to a DN-202WT.
•
Flashing quickly
(approximately
twice per second)
:
DN-202WR
is “searching” for a DN-202WT.
•
Solidly lit:
DN-202WR is paired to a DN-202WT.
5.
Level Knob:
Turn this knob to set the volume of the audio signal sent
to the
outputs
.
6.
Signal Lights:
These LEDs light up when DN-202WR is receiving an
incoming audio signal from DN-202WT.
7.
Outputs
(
Balanced XLR
)
:
Use XLR cables to connect these line-level
outputs to your audio source (loudspeakers, mixer, amplifier, etc.). See
for more information.
8.
Outputs
(
Unbalanced 1
/
4”
/
6.35mm
)
:
Use 1/4” (6.35 mm) cables to
connect these line-level outputs to your audio source (loudspeakers,
mixer, amplifier, etc.). See
for more information.
Note:
For stereo operation, make sure the left (
L
) and right (
R
)
inputs
are connected to left and right outputs, respectively.
