10
S500 Plus
SP20003_REV_1
General Adjustments
HANDLE BAR ADJUSTMENT
The
“Handle bars”
are adjustable to achieve the
correct working height for the operator.
To set:
• Slacken 2-off nuts (Item 1) ¼” turn
[17mm spanner]
• Raise / lower the “Handle Bar” to the desired
position”
• When set, tighten the nuts (Item 1).
CHANGE A REEL
The Reel can be removed easily for maintenance or to fit an interchangeable unit.
• With the stand in the “Down” position (see image 1), slacken the 3-off bolts
(item 1) [13mm spanner]
• Rotate the Reel handle to align the large holes with the bolt heads.
• Pull the handle, this will cause the drive to disengage and the reel to rest on
the floor.
• Move to the back of the machine, push down on the handles causing the front
of the machine to lift.
• Put the stand in the “Up” position (see image 2) and simply maneuver the machine
off the Reel. Leaving it on the ground.
• To fit the new Reel, reverse the above.
A
Item 1
Item 1
Image 1
Item 1
Image 2
Summary of Contents for S500 PLUS
Page 13: ...13 S500 Plus SP20003_REV_1 ...
Page 21: ...Notes ...
