Denkovi DAEnetIP2 v2, User Manual

Page: 29 / 57

DAEnetIP2 v2 User Manual
21 Apr 2020
- 29 -
listen port for Web
server. Allowed values
80 and >1024 INTEGER(0..65535)
x .9.1.23.0 cfgSNMPport read-write (fw>=4.094) Defines
listen port for SNMP
server. Allowed values
161 and >1024 INTEGER(0..65535)
x .9.1.25.0 cfgP3Dir read-write Bit mask with direction
of P3 pins. 1-Output, 0-
Input INTEGER(0..255)
x .9.1.26.0 cfgP5Dir read-write Bit mask with direction
of P5 pins. 1-Output, 0-
Input INTEGER(0..255)
x .9.1.27.0 cfgPortPullUps read-write Disable/Enable pull-ups
for P3 and P5 I/O pins.
0-Disable, 1-Enable INTEGER(0..1)
x .9.1.29.0 cfgP5DupRST read-write Bit mask showing on
which P5 pins to
duplicate TargetRST
signal. Pins must be
outputs in cfgP5Dir.
Available from v.4.097 INTEGER(0..255)
x .9.1.30.0 cfgDefault read-only Reading this OID will
load factory default
settings of
DAEnetIP2
v2 and restart
DAEnetIP2 v2 .
INTEGER
x .9.1.31.0 cfgDigitalInput
sFilter read-write Digital Inputs Filter
(0..200), ms.
Value 0 disables the
filter. INTEGER (0..200)
x .9.1.32.0 cfgAnalogInput
sFilter read-write Analog Inputs Filter
(0..30), sec.
Value 0 disables the
filter. INTEGER (0..30)
9.2. Analog traps
Table 9.2. Analog traps
OID Name Access Description Syntax
x .9.1.122.1.0 atrPin1Low read-write Pin low threshold INTEGER(0..1023)
x .9.1.122.2.0 atrPin1High read-write Pin high threshold INTEGER(0..1023)
x .9.1.122.3.0 atrPin2Low read-write Pin low threshold INTEGER(0..1023)
x .9.1.122.4.0 atrPin2High read-write Pin high threshold INTEGER(0..1023)
x .9.1.122.5.0 atrPin3Low read-write Pin low threshold INTEGER(0..1023)
x .9.1.122.6.0 atrPin3High read-write Pin high threshold INTEGER(0..1023)
x .9.1.122.7.0 atrPin4Low read-write Pin low threshold INTEGER(0..1023)
x .9.1.122.8.0 atrPin4High read-write Pin high threshold INTEGER(0..1023)
x .9.1.122.9.0 atrPin5Low read-write Pin low threshold INTEGER(0..1023)